This is VeloSolo
Solution Graphics

Shop

Handlebars, Stems, Bar Tape and Grips


IMPORTANT NOTE: Shopping on this website is conducted through Paypal's secure system. When clicking on a 'purchase' button or entering any personal information you will be taken to PayPal's fully secure pages. Paypal's basic shopping cart will rack up the postage excessively (especially in the UK). Don't worry! - multiple purchases will where possible receive a combined shipping refund. Please see shipping page for more - maximum shipping charged within the UK mainland is £6.95 with most orders shipping for £2 - £4. Excess shipping will be manually refunded when the order is processed.

VeloSolo 'Squeeze' Bar - DISCONTINUED - FINAL STOCK at 20% off!

A beautifully machined piece of engineering, hand made from start to finish in the UK. Perfect for urban or polo use. Cut from a solid block of 6082 aluminium alloy. Constant diameter straight bar (solid) with domed ends, central knurling and laser engraving. Reassuringly hefty and a pleasure to handle.

Please note. Sadly we are discontinuing this bar. At present we still have final stock of the following options ONLY: custom polished in 26.0mm & 26.4mm (ALL OTHER SIZES/COLOURS SOLD OUT). See listing below for 26.0mm option.

Length of all bars is 38cm. This is a good all-round sensible width for traffic dodging while still retaining full control - remember your feet and pedals will be wider than this anyway. See FAQ for more.

IMPORTANT: being constant diameter these bars need care in fitting to avoid scratches - please see the Blog article for fitting tips before installing these bars and ensure they will fit your stem - we cannot accept returns of scratched bars because the wrong size was forced in! Each bar is supplied with detailed fitting instructions. Brake levers that fit this bar include the Dirt Harry and Tektro Cross Top levers. Please see FAQ for handlebar info. Please note that traditionally polished items may tarnish over time due to weather, normal use etc and may require cleaning or re-polishing - we recommend 'Peek' (easily found on eBay).

SPECIAL OFFER while final stocks last! 20% off! Previously £49.95 now just £39.95. Note: Refund will be issued when order is processed.
£49.95 + UK shipping at £4.95  EU £12.95 (add £8)  WORLD £12.95 (add £8)
Note: final stock of the following options left ONLY: custom polished in 26.0mm & 26.4mm
size
colour
click here to see more pictures of this item click here to see more pictures of this item click here to see more pictures of this item click here to see more pictures of this item

more pictures

VeloSolo 'Squeeze' Bar 26.0mm - DISCONTINUED - FINAL STOCK at 20% off!

As above but in 26.0mm diameter to fit 'modern' stems including various Nitto models below. Pair with the Nitto Technomic in 50mm or 70mm for a fast steering upright 'urban' set-up. Last stock available in polished and in one length of 38cm.

Sadly we are discontinuing this bar. At present we still have final stock of the following options ONLY: custom polished in 26.0mm or 26.4mm (ALL OTHER SIZES/COLOURS SOLD OUT). See listing above for 26.4mm option.

£49.95 + UK shipping at £4.95  EU £12.95 (add £8)  WORLD £12.95 (add £8)
SPECIAL OFFER while final stocks last! 20% off! Previously £49.95 now just £39.95. Note: Refund will be issued when order is processed.
Note: final stock of the following options left ONLY: custom polished in 26.0mm & 26.4mm
colour
click here to see more pictures of this item

more pictures

VeloSolo Pre-Cut 40cm Riser Bar - last ever stocks! £8.00 off, were £24.95 now just £16.95!

This is our very popular cut-down riser. Not being able to find a riser bar in the required width we take NOS mountain bike risers and reduce them to a more suitable narrow width for urban use of 40cm. Additional wider 50cm option now in stock. This gives more space for controls/grips and a wider position compared to the more urban 40cm. Ready to fit with grips of your choice (40cm is not usable with 'lock-on' type grips).

These are professionally cut down by our UK engineers for a superb 'factory finish' with chamfered and machined ends inside and out. Finished in polished aluminium alloy or black. All bars have the VeloSolo logo laser engraved as with our Squeeze bars above.

Rise is approximately 30mm with slightly swept back ends. Stiff and strong and ideal for commuting and city use. Fits any 25.4 stem or use a Nitto shim to fit to 26.0mm stem or a Zenith 25.4mm to 31.8mm shim for oversize stems. Please see FAQ for handlebar info.

£24.95 £16.95 + UK shipping at £5.95  EU £13.95 (add £8)  WORLD £13.95 (add £8)
Note: 50cm SOLD OUT - however, we can supply these full size (610mm) or cut to your required length (without VeloSolo logo) - please email to order
width
colour
click here to see more pictures of this item click here to see more pictures of this item click here to see more pictures of this item click here to see more pictures of this item click here to see more pictures of this item

more pictures

Nitto NJS Approved B123 Steel Track Handlebar

Classic super strong chromed steel track bar from Nitto. NJS certified for professional Keirin track use. Curving forward flat section and deep drop. Available with width of 38cm or 40cm centre to centre. Fits 25.4 stem or use Nitto shim to fit to 26.0mm stem. Made in Japan with beautiful bright chrome finish and good old 'brown paper' wrapping. Yes, Nitto make lighter weight aluminium alloy versions of this bar (email us if you want one) but there is just something about the incredibly solid feeling, deeply chromed, reliable steel heft of this bar that appeals. On pulling it out of the brown paper wrapping you will know what we mean. Please see FAQ for handlebar info.

£59.95 + UK shipping at £5.95  EU £16.95 (add £11)  WORLD £16.95 (add £11)
Note: special order item - there will be a delay between purchase and dispatch.
width
click here to see more pictures of this item

more pictures

Nitto NJS Approved B123 CRO-MO Steel Track Handlebar

Exact same design as above but made from cro-mo steel for a slight weight advantage. NJS certified for professional Keirin track use. Curving forward flat section and deep drop. Available with width of 38cm or 40cm centre to centre. Fits 25.4 stem or use Nitto shim to fit to 26.0mm stem. Made in Japan with beautiful bright chrome finish and traditional paper wrapping (grey not brown).

£79.95 + UK shipping at £5.95  EU £16.95 (add £11)  WORLD £16.95 (add £11)
Note: special order item - there will be a delay between purchase and dispatch.
width
click here to see more pictures of this item

more pictures

Zenith Aluminium Alloy Track Handlebar 26.0mm - DISCONTINUED

These are a brand new bar to VeloSolo and a lighter weight (265g) and more affordable alterrnative to our steel Nitto bars above. This is a very close copy of the Nitto 123 in the classic track bar shape with traditional curved drops. No grooves.

Polished finish with no logos. Width is 41cm centre to centre (centre of drops) and 42cm at the base of the slightly flared out drops. Drop around 165mm. Stem fitting is 26.0mm. highly recommended. Please see FAQ for handlebar info.

£26.95 + UK shipping at £5.95  EU £12.95 (add £7)  WORLD £12.95 (add £7)
click here to see more pictures of this item click here to see more pictures of this item

more pictures

Nitto Noodle Aluminium Alloy Drop Handlebar - last 42cm in stock

Slightly different form the normal Nitto drop bar shape but with a very popular cult following. Originally designed by the Rivendell Bicycle Works in the US, these are made by Nitto in Japan. Instead of a completely straight top section these have a slight bend in the tops to provide a more comfortable upright position. It sounds odd but this subtle rearwards kink where your hands sit gives a more natural hand position and works great for city riding or just general use. Worth a Google search for more feedback.

Drop is reasonably moderate at 135mm. Traditional shape with no grooves and rounded drops. Nitto have even used a very attractive classic style crest on the sleeved section. Two widths available of 40cm centre to centre (centre of drops) or wider 42cm centre to centre. Fits 26.0mm stem. Made in Japan. Lightweight, good looking and well priced - highly recommended. Please see FAQ for handlebar info.

£45.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
width
click here to see more pictures of this item click here to see more pictures of this item

more pictures

Nitto B115 Drop Handlebar 25.4mm - DISCONTINUED

These are a classic 'old school' compact Italian drop bar shape; rounded not ergonomic, with a flat top section and no grooves for cables or similar. Perfect for a classic build.

Model is the 420mm (not 400mm labeled in pics) Width is 41cm centre to centre (centre of drops) and 42cm at the base of the slightly flared out drops. Fits 25.4mm stem. Made in Japan. Lightweight, good looking (current stock has attractive 'Olympiade' crest) and well priced - highly recommended. Please see FAQ for handlebar info.

£41.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
click here to see more pictures of this item

more pictures

Zenith Shallow 'Italian' Drop Handlebar 25.4mm

A superb budget alternative to the Nitto bars above. A copy of the Nitto B115 this is a classic compact shape with traditional curved drops but with shallow grooves to upper section.

Polished central section (bead blasted to remainder). No logos. Width is 40.5cm centre to centre (centre of drops) and 41.5cm at the base of the very slightly flared out drops. Drop approx 140mm. Weight is 355g. Options for 25.4mm. Highly recommended. Please see FAQ for handlebar info.

£27.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
size
click here to see more pictures of this item click here to see more pictures of this item

more pictures

Nitto RB-018 Heat-Treated Bullhorn Bar

Another Nitto classic, the aluminium alloy bullhorn bar with up-turned ends. Probably the nicest bullhorn out there and a neat alternative to chopping down that old Cinelli bar in the shed. Available in two widths of 38cm or 40cm. Fits a 26.0mm stem.

This is the high spec heat-treated and gun-metal grey anodized version. Nitto make a cheaper non-HT bullhorn too. Made in Japan with laser engraved Nitto markings. Works well with plug-in or cross-top type levers.

£59.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
Note: special order item - there will be a delay between purchase and dispatch.
width
click here to see more pictures of this item

more pictures

Zenith Alloy Bullhorn Bar - DISCONTINUED

A more affordable alternative to the Nitto above. A slightly 'squarer' design than the RB-018 with slightly longer 'horns' - easy to cut down if required. Available in one width of 40.5cm approx centre to centre. Options include 25.4mm stem fitting in silver or black and 26.0mm stem fitting in black only.

Available in polished silver or black. Both with no logos or engraving. Works well with plug-in or cross-top type levers.

£24.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
click here to see more pictures of this item

more pictures

Kalloy Multi Position 'Butterfly' Trekking Handlebar 25.4mm - DISCONTINUED

A niche bar but a really useful one that has a faithful following especially amongst touring cyclists. These have a multitude (near infinite!) number of riding postions and with the ends at a different 'level' to the middle these can be mounted either way up and at various angles to suit personal preference. Google (images) for 'butterfly handlebar' to see the various ways this bar can be used. The Kalloy model is great value and a very close copy of the Modolo Yuma trekking bars.

Available in polished silver or semi-gloss black. Both with no logos or engraving to main area. Available in one width of 570mm, this is a good commuting bar but being wide it is not really suited to serious traffic weaving. Usable with any 25.4mm stem. Best used with handlebar tape or ideal with one piece long foam grips (see Zenith foam grips lower down this page). Brake mounting area (middle or ends) is 22.2mm so any regular MTB brake levers can be used.

£27.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
click here to see more pictures of this item click here to see more pictures of this item

more pictures

Zenith Alloy Curved Crescent Bar - DISCONTINUED

A brand new bar from Zenith similar to the Noah's Arc from Soma. These give a similar riding postion to a very swept back flat bar but are fully curved for a unique look. Available in one width of 540mm (can be cut down). Fits a 25.4mm stem.

Available in polished silver or black. Both with no logos or engraving. Use with any regular grips and any 22.2mm brake lever.

£24.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
click here to see more pictures of this item click here to see more pictures of this item

more pictures

Nitto RM-016 Moustache Heat-Treated Handlebar

A bit different to the above bars - imagine a drop bar with the ends turned back up. Consequently quite wide but with a huge range of hand positions and very minimal drop. Sweeps forward quite a bit so keep the stem length shorter than normal. Heat-treated aluminium alloy with a 25.4mm clamp area. Now available in 26.0mm too. Satin finish, made in Japan.

£69.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
Note: special order item - there will be a delay between purchase and dispatch.
size
click here to see more pictures of this item

more pictures

Nitto B2500AA Straight Handlebar - DISCONTINUED

Completely straight bar in aluminium alloy. Not quite as narrow or exclusive as our Squeeze bar but a very attractive bar from the big 'N'. Width is 50cm end to end with 25.4mm clamp area. Great for city or commuting use.

£34.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
click here to see more pictures of this item

more pictures

Deda Dritto Straight Handlebar - DISCONTINUED

Another straight bar option in 6061-T6 polished aluminium alloy but sized to fit modern 26.0mm stems. Made in Italy. Width is 50cm end to end but we are happy to cut these down to whichever custom width you require at no extra cost (min advised around 38cm). Please send a note when ordering

£24.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
click here to see more pictures of this item

more pictures

Custom Sized Kalloy Flat Bars - DISCONTINUED

Mountain bike flat bars (slightly swept back) from Kalloy in satin black or polished/satin silver (Kalloy seem to vary the finish on these between polished and satin - please email if a particular finish is required). Clamp area is 25.4mm to fit MTB stems or use on a road/fixed bike with quill stem (see below).

Note: Kore black bars now replaced by un-branded Kalloy. Un-branded (no logos) with gentle rear sweep around 5 degrees. Standard width is 560mm (22") but we are happy to cut these down to whichever custom width you require at no extra cost (min advised around 38cm). Please send a note when ordering.

£21.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
click here to see more pictures of this item

more pictures

Zenith (Gran Compe) Forged Quill Stem 25.4mm or 26.0mm - IMPORTANT, SEE STOCK NOTES BELOW

As with Andel and Surly cogs so it is with Zenith and Dia Compe - this is the exact same stem Zenith manufacture for Dia Compe but unbranded and logo free. Our most popular stem. Not having a GC logo makes it around £15 less and superb value. These are new to VeloSolo and fill the gap nicely between the Kalloy and Nitto stems. Quill height is 130mm with max extension of 62mm.

Styling is very similar to the classic Cinelli 1A or Nitto Technomic. Manufacture is equally good being forged, with high quality machining and a very attractive polished or black anodized finish. There is a large range of options - clamps in 25.4mm or 26.0mm, lengths in 80mm or 100mm and finish in polished or black. New length of 60mm now in stock. Quill is 22.2mm (standard 1") for threaded steerer. Angle is 73 deg. Highly recommended. Please see FAQ for handlebar and stem info

Note: standard model in all sizes above has a 130mm quill with max extension of 63mm. A longer quill (180mm with max extension of 113mm) is now available in two options only; 25.4mm x 80mm black and 26.0 x 80mm polished. Please email to request these options or use 'send a message to seller' when checking out.

£27.95 + UK shipping at £4.95  EU £11.95 (add £7)  WORLD £11.95 (add £7)
Note: currently OUT OF STOCK = 25.4 x 60, 25.4 x 100, 26.0 x 60, 26.0 x 100mm in black
clamp
length
colour
click here to see more pictures of this item click here to see more pictures of this item click here to see more pictures of this item

more pictures

Kalloy KL NOS Forged Stem 25.4mm Concealed Clamp

Very popular stem, this version has a concealed style clamp bolt similar to a Cinelli XA. This is a very solid stem in forged and polished aluminium alloy with a 25.4mm clamp and a 150mm quill. Perfect match for our cut-down risers. Also fits track bars including various Nitto models.

Quill is 22.2mm (standard 1") for threaded steerer. Available in two lengths. Regular 80mm or longer 100mm. Angle is 73 deg. Please see FAQ for handlebar and stem info

£17.95 + UK shipping at £3.95  EU £10.95 (add £7)  WORLD £10.95 (add £7)
length
Note: 60mm discontinued
click here to see more pictures of this item click here to see more pictures of this item

more pictures

Kalloy KL NOS Forged Stem 25.4mm BLACK £3.00 off, were £15.95 now just £12.95!

Exact same stem as above but in black powder-coated finish. Clamp is 25.4mm with the same 150mm quill. Perfect match for our cut-down risers. Also fits track bars including various Nitto models.

Quill is 22.2mm (standard 1") for threaded steerer. Available in two lengths - 60mm or 100mm. Angle is 73 deg. Please see FAQ for handlebar and stem info

£15.95 £12.95+ UK shipping at £3.95  EU £10.95 (add £7)  WORLD £10.95 (add £7)
Note: 80mm discontinued
length
click here to see more pictures of this item click here to see more pictures of this item

more pictures

Kalloy Short Reach Forged Stem 25.4mm

This is a one piece forged 'swan neck' design. Very popular with taller extension allows around 1 inch (25mm) higher position of bars together with slightly more forward reach (50mm). Forged in one piece with 'polished' or new black finish.

As above ideal for town use with cut-down risers or 'all-rounder' style bars. Quill is 22.2mm (standard 1") for threaded steerer. Clamp size is 25.4mm. Please see FAQ for handlebar and stem info

£17.95 + UK shipping at £3.95  EU £10.95 (add £7)  WORLD £10.95 (add £7)
colour
click here to see more pictures of this item click here to see more pictures of this item

more pictures

Nitto Dirt Drop MT-10 Forged Quill Stem 26.0mm Clamp - DISCONTINUED

We are now stocking the Nitto Dirt Drop to offer a higher rise, shorter reach stem as per the Kalloy/Kalin models above but crucially with a 26.0mm bar fitting. Quill is 190mm with 130mm above the min insert line. Reach is minimum 80mm (100mm also available) but combined with the long quill and high rise angle (107 degrees) this provides a much taller, closer position than regular Nitto stems.

Made in Japan, usual superb Nitto forged one piece construction with anodized satin finish. 22.2mm (standard 1") quill for threaded steerer. Clamp size is 26.0mm. Aluminium wedge. Please see FAQ for handlebar and stem info

£54.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
click here to see more pictures of this item

more pictures

Nitto N.J. PRO AA (Jaguar) NJS Certified Stem 25.4mm

Beautiful professional level forged stem from Nitto. Certified (NJS stamped) for professional level Keirin track racing in Japan. Angle is 58 deg so gives a very deep drop to the bars. Clamp size is 25.4 with a 22.2mm (standard 1") quill for threaded steerer. Length of 80mm or 90mm in polished finish and fitted with aluminium alloy wedge. Made in Japan.

£89.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
Note: special order item - there will be a delay between purchase and dispatch.
length
click here to see more pictures of this item

more pictures

Nitto Technomic Forged Quill Stem 26.0mm Clamp - special offer on last few 25.4mm x 70mm (long quill) and 26.0mm x 80mm (regular quill) from stock - 40% off! was £49.95, now just £29.95!

Attractive traditional forged stem with reliable nutted bolt to front. Perfect for a more upright, controllable position on city bikes. A good match for Squeeze bars or Nitto Bullhorns. Angle is 73 deg with a 22.2mm (standard 1") quill for threaded steerer. Polished finish and fitted with aluminium alloy wedge. Made in Japan.

NOTE: FINAL STOCK IN TWO OPTIONS ONLY at very special offer: 25.4mm x 70mm (long quill) and 26.0mm x 80mm (regular quill) - 40% off! was £49.95, now just £29.95!

£29.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
option
click here to see more pictures of this item

more pictures

Nitto Dynamic Forged Quill Stem 26.0mm Clamp - DISCONTINUED

Another lovely forged 73 deg stem from Nitto. Superb machining and finish. Usual 22.2mm (standard 1") quill for threaded steerer. Available in large range of lengths from 80mm to 120mm with 26.0mm clamp. Polished finish and aluminium alloy wedge. Made in Japan. Angle is 73 deg.

£54.95 + UK shipping at £5.95  EU £15.95 (add £10)  WORLD £15.95 (add £10)
Note: special order item - there will be a delay between purchase and dispatch.
click here to see more pictures of this item

more pictures

Nitto Handlebar Shim 25.4mm to 26.0mm

Precision made shim to space a 25.4mm track bar (or VS Squeeze bar) to fit perfectly in a 26.0mm stem. Not cheap (as with Nitto bars the weak £ is affecting these badly) but safe, secure and very well made in stainless steel. Please see FAQ for handlebar and stem info

£11.95 + UK shipping at £2.95  EU £6.95 (add £4)  WORLD £6.95 (add £4)
click here to see more pictures of this item

more pictures

Zenith Handlebar Shims

Precision machined aluminium alloy shims in three sizes. Available in 22.2mm to 25.4mm (silver finish), 25.4mm to 31.8mm and 26.0mm to 31.8mm (black finish). A safe and reliable way to fit a narrower bar to a wider stem. Please see FAQ for handlebar and stem info

£6.95 + UK shipping at £2.95  EU £6.95 (add £4)  WORLD £6.95 (add £4)
size
click here to see more pictures of this item

more pictures

Soyo Keirin Long Grips - DISCONTINUED

Designed for drops, these are long grips to fit around lower section of track bars. Alternatively slice off closed end to fit to curves, work well on bullhorn bars too. Available in black with grippy 'file' type pattern. Now in white too! Made in Japan.

£12.95 + UK shipping at £3.95  EU £7.95 (add £4)  WORLD £7.95 (add £4)
click here to see more pictures of this item click here to see more pictures of this item

more pictures

Soyo SV Long Grips - DISCONTINUED

A significantly uprgaded version of the traditional Soyo grips. Same length as above but these are a heavier duty type made of slightly thicker rubber with a more agressive file pattern. Available in black or white. Made in Japan.

£19.95 + UK shipping at £3.95  EU £7.95 (add £4)  WORLD £7.95 (add £4)
click here to see more pictures of this item

more pictures

Zenith Long Rubber Grips - DISCONTINUED

A fantastic value alternative to the Soyo grips above. These Zenith rubber grips are virtually identical in design to regular Soyos' but come with an open end and plugs included. Designed for drop bars but can be used on other style bars too. Available in black only with the same very grippy 'file' pattern as per Soyo.

Please note: the plugs included are designed for thicker aluminium bars and will not be usable with steel/cro-mo Nitto drops. We recommend combining the grips with Velox plugs in this case.

£8.95 + UK shipping at £3.95  EU £7.95 (add £4)  WORLD £7.95 (add £4)
click here to see more pictures of this item click here to see more pictures of this item

more pictures

Zenith Foam Extra Long Grips - DISCONTINUED

A one-piece extra long grip ideal for Kalloy 'Butterfly' bars, these are also well suited to Nitto drops and adaptable for use with other bars too. Closed cell foam (will not absorb moisture) in a relatively dense, thin style retaining plenty of 'feel'. These come complete with end plugs included. Total length of each grip is 42cm. The grips will cover virtually all of a drop bar and most of a Butterfly bar as shown. Available in black only.

Please note: the plugs included are designed for thicker aluminium bars and will not be usable with steel/cro-mo Nitto drops. We recommend combining the grips with Velox plugs in this case. These grips can be tricky to fit! Ensure the bar is grease free and install with lots of hairspray or grip glue, and take time to work them on carefully (to avoid damage do not use tools etc or excessive force). Leave overnight to dry.

£8.95 + UK shipping at £3.95  EU £7.95 (add £4)  WORLD £7.95 (add £4)
click here to see more pictures of this item click here to see more pictures of this item

more pictures

Oury Grips - final stocks! £7 off, were £23.95 now just £16.95!

These are the world famous USA Oury grips available in all the popular colours, perfect for flat or riser bars on and off-road. Genuine USA stock with hologram sticker in each pack. Large block pattern in durable but soft compound for maximum comfort. Suitable for any bar with 22.2mm grip section, perfect for our cut-down risers or any other flat or riser MTB or BMX bar.

These are the last remaining stocks we have and once colours are gone they are gone for good! Available in black, white, green. Other colours - pink, orange, grey, red, blue, purple, day-glo, yellow, 'Pastel Green' (Bianchi celeste), 'Chocolate Brown' (dark choc), light brown (milk choc) & burgundy now sold out and discontinued. Difficult to get the colours accurate on screen but they are bold and bright in 'real life'.

£23.95 £16.95 + UK shipping at £3.95  EU £8.95 (add £5)  WORLD £8.95 (add £5)
colour
click here to see more pictures of this item click here to see more pictures of this item click here to see more pictures of this item

more pictures

Velo Synthetic Leather Bar Tape - DISCONTINUED

A very affordable alternative to the real thing from Brooks and others, this is a synthetic leather look bar tape from Velo. Simple clean look, subtle 'grained' finish and no branding. Traditional style thin padding, includes chrome effect end plugs. Available in black or dark tan.

£14.95 + UK shipping at £3.95  EU £8.95 (add £5)  WORLD £8.95 (add £5)
click here to see more pictures of this item

more pictures

Cinelli World Champion and Lumen Bar Tape - FINAL STOCK AT 50% OFF!

Two out of the ordinary styles of Cinelli's classic cork bar tape. Choose from World Champion with rainbow stripes or the remarkable light emitting Lumen. This soaks up light and emits it in the dark, comes complete with relective end plugs (note: Italian now sold out and discontinued). Includes end plugs, finishing tape etc.

Discontinued - final stock at 50% off! Previously £17.95 now just £8.95.
£17.95 £8.95 + UK shipping at £3.95  EU £8.95 (add £5) WORLD £8.95 (add £5)
option
click here to see more pictures of this item

more pictures

Cinelli Classic Cork Bar Tape White - DISCONTINUED

Plain colous of Cinelli's classic cork bar tape. Black discontinued, limited stock of white still available. Embossed Cinelli logo. Complete with end plugs, finishing tape and extra pieces for brake levers. Made in Italy. Boxed with fitting instructions.

£14.95 + UK shipping at £3.95  EU £8.95 (add £5)  WORLD £8.95 (add £5)
click here to see more pictures of this item

more pictures

Velox Maxi Black Cork Bar Tape - DISCONTINUED

Great value plain cork tape in black from velox of France. Simple clean look with no branding and padded 'soft feel'. Includes chrome effect end plugs. Boxed with fitting instructions to rear.

£9.95 + UK shipping at £3.95  EU £8.95 (add £5)  WORLD £8.95 (add £5)
click here to see more pictures of this item

more pictures

Deda White Cork Bar Tape

White only now left in stock. Another option in Italian cork tape. This one available in 'Bianchi' celeste or yellow or orange. Also standard black or white. Very comfortable 'soft feel' with Deda embossing and carbon look or chrome end plugs. Includes finishing tape. Made in Italy. Boxed with fitting instructions.

£10.95 + UK shipping at £3.95  EU £8.95 (add £5)  WORLD £8.95 (add £5)
colour
click here to see more pictures of this item

more pictures

Velox Tressostar Delux Cloth Bar Tape - blue only

This is a more recent tape from Tressorex to compliment the classic black and white standard cloth tape below. This is slightly heavier duty and available in three different colours - grey, orange and brown (tan). New colour light blue now available. Price is per pair (two rolls needed for one set of drop bars). Made in France. Does not include end plugs.

£7.95 + UK shipping at £2.95  EU £7.95 (add £5)  WORLD £7.95 (add £5)
colour
click here to see more pictures of this item

more pictures

Velox Cloth Bar Tape - white only

Legendary Velox cloth handlebar tape available in black or white. Price is per pair (two rolls needed for one set of drop bars). Made in France. Does not include end plugs.

£6.95 + UK shipping at £2.95  EU £7.95 (add £5)  WORLD £7.95 (add £5)
colour
click here to see more pictures of this item

more pictures

Nitto EC 01 and EC 02 Alloy End Plugs - DISCONTINUED

These are a new addition to VeloSolo and show typical Nitto high quality construction, finish and attention to detail. NOTE: please measure the internal size of your bars carefully as these will only fit the diameters given.

Available in two different models - the EC 02 is supplied with two alternative rubbers and will fit any bar with a minimum 15mm to maximum 18mm internal diameter (including VeloSolo Riser bars, Zenith Crescent bars, Deda Dritto). The EC 01 fits thinner wall bars with a larger 20mm to maximum 21mm internal diameter (including Nitto Moustache, Noodle, Zenith Bullhorn & Track and Kalloy flat bars).

Anodized aluminium alloy end with Nitto engraving, stainless steel allen key fitting and inner rubber expander. Available in black or silver. Price is per pair. Highly recommended.

£14.95 + UK shipping at £3.95  EU £8.95 (add £5)  WORLD £8.95 (add £5)
click here to see more pictures of this item click here to see more pictures of this item

more pictures

Velox Rubber End Plugs - DISCONTINUED

Very secure internal expander type. Excellent protection for the ends of your bars, easily removed and re-used without falling out like normal plugs! Sized to fit drop bars (minimum internal diameter is 20mm). Price is per pair.

Note: these are genuine Velox plugs but Velox are no longer branding these with 'Velox' as per pictures.

£4.95 + UK shipping at £2.95  EU £7.95 (add £5)  WORLD £7.95 (add £5)
click here to see more pictures of this item

more pictures

Additional Shipping Units for International Shipping

Paypal's basic shopping cart does not calculate international shipping (please see shipping page for full details). If buying from outside the UK please add the extra shipping required via these 'shipping units'. For example, a cog costs £15.95 and UK shipping at £2.25 will be included. For delivery outside the UK shipping is £4.25 (£2.00 extra) so if you purchase a cog from Europe or USA etc you will also need to purchase 1 x £2.00 shipping units.

If you are unsure simply place the order as required and we will advise of any additional shipping costs necessary. Alternatively, if you would like an exact quote for shipping or a detailed Paypal invoice before making a purchase please email and we will be happy to help.

additional shipping
shipping unit

return to shop front

© VeloSolo Ltd ® 2023.